KNOWLEDGE FOR BETTER SELECTION
A closer look
at your tooling.Page 4
Application notes, specifications and practical selection guidance.
Showing 37–48 of 67 articles · Page 4 of 6
Boring Head with 11 mm Pilot: Compare Fine and Rough Configurations
Compare two boring heads with an 11.0 mm pilot by operation, range and body envelope, without treating the shared pilot as proof of interchangeability.
Read article ↗Boring Head with 18 mm Pilot: Resolve Overlapping Working Ranges
Select an 18 mm pilot boring head by separating fine and rough operations, cartridge intervals and installation dimensions in two documented configurations.
Read article ↗Boring Head with 22 mm Pilot: Check the Installed Envelope
Compare 22 mm pilot boring heads by body diameter, length and cartridge coverage before reviewing the complete installed tooling envelope.
Read article ↗Boring Head with 36 mm Pilot: Map Cartridge Coverage by Bore
Map 36 mm pilot boring-head ranges to specific cartridges and operations, using documented fine and rough configurations without assuming interchangeability.
Read article ↗Boring Head with 46 mm Pilot: Review Reach and Assembly Geometry
Evaluate a 46 mm pilot boring head using body dimensions, working intervals and the complete installed assembly rather than assuming bore depth from head length.
Read article ↗TPGH0802 Boring Cartridge: Identify More Than the Insert Family
Identify a TPGH0802 boring cartridge using its range, connection and length, while keeping the complete insert designation and supply scope separate.
Read article ↗TPGH1103 Boring Cartridge: Match Range, Connection and Seat
Compare TPGH1103 boring cartridges across documented ranges and connections, without treating a shared insert family as a universal replacement specification.
Read article ↗CCMT0602 Rough Boring Cartridge: Distinguish the Set Configurations
Identify CCMT0602 rough boring cartridge sets by working interval, connection and overall length, including two distinct connection-18 configurations.
Read article ↗CCMT09T3 Rough Boring Cartridge: Record the Insert and Seat Requirements
Check CCMT09T3 cartridge-set identity, insert measurements and missing suffix information before ordering cartridges or consumable inserts.
Read article ↗CCMT1204 Rough Boring Cartridge: Keep Head and Set Ranges Separate
Compare CCMT1204 rough boring cartridge sets by connection and working interval, without extending an individual set to the full supporting-head range.
Read article ↗CNC Tool Holders: Identify Both Sides of the Assembly
Choose CNC tool holders by distinguishing component type, machine-side interface, tool-side requirements and the complete installed assembly.
Read article ↗Tool Holder Adapters: Check Both Mating Interfaces
Compare tool holder adapters by both mating interfaces, recorded taper options and assembled position, using two documented VDI adapter examples.
Read article ↗