KNOWLEDGE FOR BETTER SELECTION
A closer look
at your tooling.
Application notes, specifications and practical selection guidance.
Showing 1–12 of 67 articles · Page 1 of 6
BMT Tool Holders: A Practical Selection Guide
Select BMT tool holders by mounting dimensions, tool position and clamping requirements, using two documented static-holder configurations as examples.
Read article ↗VDI Tool Holders: Interface, Orientation and Fit
Select VDI tool holders by checking the turret interface, radial or axial arrangement, direction and full drawing dimensions before requesting a quotation.
Read article ↗BMT Boring Tool Holder: Bore Size, Centre Height and Assembly Checks
Compare BMT boring tool holder bore size and centre height using two documented configurations, then prepare a clear bar-and-holder enquiry.
Read article ↗BMT External Turning Tool Holder: Position and Mounting Checks
Read BMT external turning holder step heights, mounting-hole orientation and envelope dimensions without confusing them with tool capacity or centre height.
Read article ↗BMT45 Tool Holder: Comparing 25 mm and 32 mm Bores
Compare two BMT45 boring holder configurations with different tool bores and shared recorded mounting fields before preparing a configuration-specific enquiry.
Read article ↗BMT55 Tool Holder: Choosing a Bore Centre Height
Compare BMT55 boring holders with 60 mm and 85 mm bore centre heights while keeping mounting geometry, bar clamping and working position separate.
Read article ↗BMT65 Tool Holder: Mounting-Pitch Orientation Checks
Compare BMT65 boring and external holder drawings without swapping horizontal and vertical pitch labels or confusing their height definitions.
Read article ↗BMT75 Tool Holder: Bore Diameter and Body Envelope
Review BMT75 holders with 50 mm and 60 mm bores, distinguishing their shared mounting fields from different overall body heights.
Read article ↗BMT85 Tool Holder: Keep Bore and Mounting Data Together
Compare documented BMT85 boring configurations without carrying mounting-face dimensions across different tool bore options.
Read article ↗VDI B1 Tool Holder: Reading a Short Radial Configuration
Read a documented VDI B1 short radial holder record, preserving direction, drawing labels and units instead of guessing dimensions from its model code.
Read article ↗VDI Radial Tool Holder: Short, Long and Inverted Forms
Compare documented VDI radial holder forms without mistaking shared dimensions for the same orientation, envelope or installation requirements.
Read article ↗Gang Tool Holders: Planning a Complete Tool Layout
Plan gang tool holder enquiries around tool positions, mounting details and the assembled layout, with two documented centre-height examples.
Read article ↗